Go to content

Main menu:

PRO SMR-Kit 60

Industrial Kits

Price: $995

High Output Industrial Grade Linear Cell Amplifier Systems with High Gain and High Output Power for Large Area Indoor Cell Coverage and/or Multiple Indoor Antenna Branches.
65 dB Iden/SMR Band Booster Kit for Telus Mike Band / Nextel phones (806-866 Mhz)
Powerful high gain system for indoor coverage for Telus Mike Band cell phones to cover an entire warehouse, business or home. Exact coverage depends on the signal level of the Iden/SMR band outside your building but you will have a large indoor signal increase with this system.
(Cottage Value#50-2 Telus Mike with 50dB repeater system also available on other page)

Included in our complete installation kit for do-it-yourself installs:

  • 65dB gain Iden/SMR band booster for Telus Mike Band and Nextel Phones

  • Power Supply included (120V)

  • 1-50ft length LMR-400 low loss wire for repeater to outdoor antenna run

  • 1-50ft length LMR-400 low loss wire for repeater to indoor antenna run

  • Yagi Iden/SMR Band Outdoor directional antenna (+ mounting clamps for pole)

  • Iden/SMR Band Indoor Antenna

  • Set up instructions

  • now includes an Antenna Mount for side of house or building

In-Building Wireless iDEN 65dB Amplifier:

  • For iDEN frequencies

  • Automatic gain control up to 65 dB

  • Approximately 2 dB gain step 40-65 dB

  • Power control logic ensures maximum output power is within cellular network standards

  • Automatic shutdown on overload

  • Gain indicator lights

  • Oscillation detection and gain reduction with auto reset intervals

  • AC power supply included

  • FCC and IC type accepted


  • Frequency 806-821 MHz, 851-866 MHz

  • Gain 65 dB

  • Max Output Power up to +30 dBm / + 30 dBm

  • Max RF +30 dBm / + 30 dBm

  • Noise Figure 3 dB nominal

  • Flatness ± 2.5 dB

  • Isolation > 90 dB

  • Power Requirements 120 V AC 3 A max

  • Connectors N-Female 50 ohms

  • Dimensions 5.6 x 3.6 x 1.7(inches) 14.2 x 9. x 4.4 (cm)

  • Weight 1.5 lbs or 0.7 kg

These high grade repeaters also have software that will shut down the unit if the amp blocks are overdriven by a new cell tower, etc. to prevent any damage to the system. With our support, we will handle any gain adjustments and easily get your system running again. All our commercial grade repeaters have a 2 year manufacturer’s warranty and a very high reliability record with all of our many systems operating for many years and still operating.

These systems are used for many commercial buildings with metal walls and roofs (most commercial buildings have metal, flat roofs), concrete underground parking garages, concrete buildings, office basements, office buildings, retail stores, government buildings, etc.

Indoor cell phone signal problems are very common due to building materials, but it’s actually quite an easy problem to solve with the right high output cell signal amplifier systems and professional set up, installation, and design advice.  Please feel free to contact us for an assessment for your building’s indoor cell coverage. We are here with the experience to help you!

Back to content | Back to main menu