HIGH POWERED DUAL BAND 55db gain Cottage Value Kit #50-3
KIT !!! Best Value Low Price for what is included !!!
need in this high output repeater kit for your own installation! Our
most sold kit in rural areas for cell service as well as rural high
speed internet. The Rogers Rocket hub, Bell Turbo hub, Rogers and
Bell HSPA internet sticks, Telus aircard, etc. have a heavy 3G data
signal for their uplink and downlink that require a strong cell
signal compared to voice or text.
New Powerful Superior 7 WATT
dual band complete repeater system!
55dB gain on both bands for
uplink and downlink signals!!
Recommended high end repeater kit for weak rural cell and data
signal solutions at cottages/rural houses for Rogers, Bell and Telus
cell and data signals. Also works well for all cell and data
signals for Canadian
regional carriers such as Aliant, Sasktel, MTS, TBay Tel, all
carriers in the territories, etc.
compromise between price and high output power for a professional
grade powerful dual band repeater
kit to deal with bad outside
cell signals in rural areas. The carrier's tower has approx.
60 Watts, your cell phone or internet stick has only approx. a very
weak 0.5 Watts which is really not intended for rural areas, so the
main issue is to throw your uplink signals RIGHT AT the tower with a
high powered repeater system. The main problem is NOT the signals
coming from the towers. A weak repeater and omni antennas will not
do the job you require. High Powered 8 WATT total output kit
on the 850Mhz band and on the 1900Mhz band for both bands. You get
everything you need for the set up including:
-New 55dB gain repeater for the uplink and downlink on both bands
with high output power
-AC power supply
-Outdoor dual band directional antenna to throw the amplified uplink
signals at the tower and gather the downlink signals for the
(Should be mounted as high as possible outside)
-50ft of ultra low loss shielded cable to bring the high frequency
signals back to the repeater from the yagi antenna with very little
loss and to give lots of height and distance to keep the outdoor and
indoor antennas apart to prevent feedback signals
-10ft of ultra low loss shielded cable to indoor antenna
-Indoor directional wall mount panel antenna to distribute signals
(Should be mounted facing the opposite direction than the outdoor
-Outdoor Antenna Wall or Roof Mount pole with mounting screws and
-Electrical tape to seal one hole in wall for cable and mainly to seal
outdoor cable connection to outdoor antenna to keep water out
-Basic instruction sheet as well as repeater instructions for easy
-Any phone support you need
kits can be used in urban or suburban areas for commercial building
use to cover large inside areas or for residential urban whole house coverage.