Go to content

Main menu:

Cottage Kit80

Cottage Kits

Price  $2900.00 CAD for the entire system.
Commercial Grade Class, 5-Band 4G-LTE data capable Residential, Small Commercial or Rural Cottage Cell Signal Amplifier System.  

Very high output system for ALL Canadian cell carriers and ALL voice, text and 4G LTE data frequencies with automatic attenuators for gain control. This system AUTOMATICALLY adjusts itself to the local cell towers, and is a high output system as allowed under Industry Canada rules. Much more powerful than systems allowed for the USA under the new FCC rules.

This system has a very high gain of 70db gain on ALL 5 frequency bands, a very high 20 dBm output power for a total of 12 Watts uplink power to throw your cell signal (from your weak 0.5 watt cell phone device) back to your local carrier's tower and to provide 12 Watts of cell signal amplified into your building from the cell tower. 

This repeater is very sophisticated and has alarms to indicate if there is any feedback occurring between the inside and outside antenna and has AUTOMATIC gain adjustors on both bands to allow this repeater system to be used in any cell signal environment ranging from very weak rural cell signals to a building in an urban area. This repeater has an LED display that indicates to the user the automatic gain adjustment levels. It will automatically adjust itself to protect the cell tower carrier network from RF noise that can cause carrier interference.

If any additional support is required for setting this system up, we will be happy to go over your exact building installation and determine the location of your local cell towers and make the appropriate system design plan for this powerful repeater system.

  • New 70db gain repeater for the uplink and downlink on all 5 bands with high output power

  • AC power supply

  • Outdoor 5 band directional antenna to throw the amplified uplink signals at the tower and gather the downlink signals for the repeater (Should be mounted as high as possible outside)

  • 75 feet of ultra-low loss shielded cable to bring the high frequency signals back to the repeater from the yagi antenna with very little loss and to give lots of height and distance to keep the outdoor and indoor antennas apart to prevent feedback signals

  • 30 feet of ultra-low loss shielded cable to indoor antenna

  • Indoor directional wall mount panel antenna to distribute signals (Should be mounted facing the opposite direction than the outdoor antenna)

  • Outdoor Antenna Wall or Roof Mount pole with mounting screws and plugs

  • Electrical tape to seal one hole in wall for cable and mainly to seal outdoor cable connection to outdoor antenna to keep water out

  • Instructions for easy set up

  • Any phone support you need for your system design and outdoor antenna aiming at the correct local cell tower location

  • All our cables are already terminated for immediate set up.

Note: This is a high output commercial grade repeater kit! 
             Always aim the outdoor directional antenna away from indoor directional antenna to prevent feedback with the high output from either end. Both ends have high output amplified signals and need to be pointed AWAY from each other and have some distance.  This system will detect overpowering from a cell tower being too close, and calibrate the system appropriately.

Back to content | Back to main menu