Back to the Professional Grade Systems

  

 

 

Custom shielded cable lengths are available for this kit as well as 2 to 4 way splitters with oscillation protection, lightning protectors and multiple indoor antennas for whatever your building cell coverage requires. 

  • Power Supply included (120V)
  • 100ft length ultra low loss cable for repeater to outdoor antenna run
  • 50ft length ultra low loss cable for repeater to indoor antenna run
  • now includes an Antenna Mount for side of house or building
PR0-GRADE#80-15 HO Industrial Grade System
 

Our system custom design and start up support is included at no extra cost so you would know exactly what you are going to pay!  The MOST powerful high output power repeater kit available that can be set up by the average person with our system design and start up calibration support.  This linear high quality low noise repeater is comparable to carrier grade repeaters and is used in many commercial and government applications across Canada.  Very high gain (dB) and Very high output power (dBm) both for the uplink and downlink.

Has a total of 15 Watts total output power for the uplink (throw to the local cell carrier's towers) and 15 Watts total for the downlink (for coverage push in the building and extra branches) with a very high 80dB gain for both the 850Mhz and 1900Mhz bands. Each band uplink/downlink can be controlled separately for exact calibration to the local towers (to prevent any noise attacks on the carrier towers which would cause them to come looking for the source of the problem and shut you down under the Industry Canada laws) and each indoor antenna. With our start up support on the phone included in the system price, you will cover any Rogers Wireless cell signals, any Bell Mobility cell signals, and any regular Telus cell signals in Canada. (Not Telus Mike or Wind Mobile-we have other systems for these)

Complete with multi-level attenuator adjustment switches for the uplink/downlink on both bands (the only way to do a maximum perfect repeater system set up) (REQUIRES our professional phone support for proper adjustment on start up which is provided by us at no extra cost with the purchase of this kit) and amp block overdrive warning lights so you can maximize the uplink/downlink signals for both bands with this repeater kit to get the high gain/output power/signal compression power for LARGE indoor coverage areas with the maximum downlink possible without overdriving the amp blocks, and reduce the uplink if you are using this repeater for commercial buildings in urban areas to prevent a "noise" attack on the carrier's local towers if you are very close to them.

Recommended for multiple indoor antenna installations for large buildings. Can also be extended for very large buildings by adding additional Bi-Directional Amplifiers on the ends of very long shielded cable runs for even more coverage if necessary (see pictures for Stratford Hospital Installation). In our system designs we also have the option to use even higher-grade shielded cable and to calculate the cable losses for the maximum system output possible. Also great for large open areas, this repeater system will also saturate huge indoor warehouse or office areas with cell signals. Can also be used in rural areas for a VERY POWERFUL uplink signal to the more distant towers and to penetrate through foliage.

Also recommended for use in urban areas if your subject building is very close to any local cell towers to avoid carrier interference as we have full control over all bands uplink/downlink levels to help you solve ANY indoor cell signal coverage issue! 



  Back to the Professional Grade Systems

 

Contact Us   

 

Sale  $2700.00 CAD 

We encourage you to consult us in the planning and installation for this powerful repeater kit installation to ensure 100% solution.  All planning for your building system is included for a 100% solution (you can fax or e-mail us your building plan if you wish for the planning).