Pro Grade Systems

 

 

 

 

 

 

 

 

 

   

$ 1900.00 CAD 

 

 

 

 

PR0-GRADE#68-12 Industrial Grade System
Premium 68dB High Power 12 Watts System

Commercial grade high output repeater system available for consumer use! This linear high quality repeater is comparable to carrier grade repeaters and is used in many commercial and government applications across Canada (see high profile customer list on home page).

Very high gain (dB) and Very high output power (dBm). Has a total of 12 Watts total output power for the uplink (to the local towers) and 12 Watts total for the downlink (for coverage in the building) with a very high 68dB gain for both the 850Mhz and 1900Mhz bands. Will cover any Rogers Wireless cell signals, any Bell Mobility cell signals, and any regular Telus cell signals in Canada. (Not for Telus Mike or Wind Mobile)

Complete with multi-level attenuator adjustment switches for the uplink/downlink on both bands (the only way to do a maximum perfect repeater system set up) (requires our professional phone support for proper adjustment on start up which is provided by us at no extra cost with the purchase of this kit) and amp block overdrive warning lights so you can maximize the uplink/downlink signals for both bands with this repeater kit to get the high gain/output power/signal compression power for LARGE indoor coverage areas with the maximum downlink as possible without overdriving the amp blocks, and reduce the uplink if you are using this repeater for commercial buildings in urban areas to prevent a "noise" attack on the carrier's local towers if you are very close to them.

Recommended for multiple indoor antenna installations with up to 4 indoor antennas for large buildings. Can also be extended for very large buildings by adding additional Bi-Directional Amplifiers on the ends of very long shielded cable runs for even more coverage if necessary (see pictures for Stratford Hospital Installation). For 1 or 2 indoor antennas in large open areas, this repeater system will cover huge indoor warehouse or office areas. Can also be used for residential in urban or rural areas for VERY POWERFUL indoor coverage.

Also recommended for use in urban areas if your subject building is very close to any local cell towers to avoid carrier interference as we have full control over all bands uplink/downlink levels to help you solve ANY indoor cell signal coverage issue!
Custom shielded cable lengths are available for this kit as well as 2 to 4 way splitters with oscillation protection, lightning protectors and multiple indoor antennas for whatever your building cell coverage requires.


Basic Pro-Grade#68-12 kit includes:

  • Very High Output 68dB gain dual band (850Mhz and 1900Mhz) repeater with full attenuator adjustments for each band uplink/downlink to maximize signals
  • AC power supply
  • Outdoor dual band 10dB gain yagi directional antenna to aim at local tower (or omni-antenna used sometimes depending on our assessment for the local towers in your area and frequency used on towers)
  • Indoor dual band ceiling mount dome antenna for indoor distribution
  • Outdoor Mount Pole for yagi antenna
  • 100ft ultra low loss shielded cable to outdoor directional antenna on roof
  • 50ft ultra low loss shielded cable to indoor dome ceiling mount antenna included (cable lengths can be adjusted as required for your installation-for custom designed building systems, you get 150ft of shielded ultra low loss cable with the cost of the kit)
  • Electrical Tape to seal outdoor cable connection to yagi antenna (water protection)
  • Screws for wall or roof mounts for outdoor antenna
  • Custom Design for your indoor coverage area in your facility for this specialized field repeater system at no additional cost
  • Calibration to local cell towers provided at no cost when powering up system

This kit has been used in many of our custom system designs for large systems such as multiple hospitals locations, office buildings, and large department stores such as the Home Depot in Fredericton, Telus Mobility customer solutions, as well as MANY Rogers Wireless and Fido store installations across Canada in plaza's and malls.

 For a List of Customers

      

Stratford Hospital High Output Repeater Installation with 7 indoor ceiling antennas

Bi-directional amplifier to extend system reach for 4 more indoor ceiling antennas

We encourage you to consult us in the planning and installation for this powerful repeater kit installation to ensure 100% solution.  All planning for your building system is included for a 100% solution (you can fax or e-mail us your building plan if you wish for the planning).

Contact Us